SLIP

Functions
err_t	slipif_init (struct netif *netif)
void	slipif_poll (struct netif *netif)
void	slipif_process_rxqueue (struct netif *netif)
void	slipif_received_byte (struct netif *netif, u8_t data)
void	slipif_received_bytes (struct netif *netif, u8_t *data, u8_t len)

Detailed Description

This is an arch independent SLIP netif. The specific serial hooks must be provided by another file. They are sio_open, sio_read/sio_tryread and sio_send

Usage: This netif can be used in three ways:
1) For NO_SYS==0, an RX thread can be used which blocks on sio_read() until data is received.
2) In your main loop, call slipif_poll() to check for new RX bytes, completed packets are fed into netif->input().
3) Call slipif_received_byte[s]() from your serial RX ISR and slipif_process_rxqueue() from your main loop. ISR level decodes packets and puts completed packets on a queue which is fed into the stack from the main loop (needs SYS_LIGHTWEIGHT_PROT for pbuf_alloc to work on ISR level!).

Function Documentation

slipif_init()

err_t slipif_init

(

struct netif *

netif

)

SLIP netif initialization

Call the arch specific sio_open and remember the opened device in the state field of the netif.

Parameters

netif

the lwip network interface structure for this slipif

Returns

ERR_OK if serial line could be opened, ERR_MEM if no memory could be allocated, ERR_IF is serial line couldn't be opened

Note

If netif->state is interpreted as an u8_t serial port number.

slipif_poll()

void slipif_poll

(

struct netif *

netif

)

Polls the serial device and feeds the IP layer with incoming packets.

Parameters

netif

The lwip network interface structure for this slipif

slipif_process_rxqueue()

void slipif_process_rxqueue

(

struct netif *

netif

)

Feeds the IP layer with incoming packets that were receive

Parameters

netif

The lwip network interface structure for this slipif

slipif_received_byte()

void slipif_received_byte	(	struct netif *	netif,
		u8_t	data
	)

Process a received byte, completed packets are put on a queue that is fed into IP through slipif_process_rxqueue().

This function can be called from ISR if SYS_LIGHTWEIGHT_PROT is enabled.

Parameters

netif	The lwip network interface structure for this slipif
data	received character

slipif_received_bytes()

void slipif_received_bytes	(	struct netif *	netif,
		u8_t *	data,
		u8_t	len
	)

Process multiple received byte, completed packets are put on a queue that is fed into IP through slipif_process_rxqueue().

This function can be called from ISR if SYS_LIGHTWEIGHT_PROT is enabled.

Parameters

netif	The lwip network interface structure for this slipif
data	received character
len	Number of received characters