wuart.h

00001 /* Copyright (c) 2012 Axel Wachtler
00002    All rights reserved.
00003 
00004    Redistribution and use in source and binary forms, with or without
00005    modification, are permitted provided that the following conditions
00006    are met:
00007 
00008    * Redistributions of source code must retain the above copyright
00009      notice, this list of conditions and the following disclaimer.
00010    * Redistributions in binary form must reproduce the above copyright
00011      notice, this list of conditions and the following disclaimer in the
00012      documentation and/or other materials provided with the distribution.
00013    * Neither the name of the authors nor the names of its contributors
00014      may be used to endorse or promote products derived from this software
00015      without specific prior written permission.
00016 
00017    THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
00018    AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
00019    IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
00020    ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
00021    LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
00022    CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
00023    SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
00024    INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
00025    CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
00026    ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
00027    POSSIBILITY OF SUCH DAMAGE. */
00028 
00029 #ifndef WUART_H
00030 #define WUART_H
00031 
00032 /* === includes ============================================================ */
00033 #include "p2p_protocol.h"
00034 
00035 /* === macros ============================================================== */
00037 #define CALC_PEER_ADDRESS(x) (((x) == 0xffff) ? (x) : (x) ^ 1)
00038 
00040 //#define PAYLD_SIZE        (PROT_WUART_PAYLD_SIZE)
00041 
00043 #define CRC_SIZE          (sizeof(crc_t))
00044 
00046 #define EOL "\n\r"
00047 
00048 #ifndef UART_FRAME_SIZE
00049 # define UART_FRAME_SIZE (MAX_FRAME_SIZE)
00050 #endif
00051 
00052 #ifndef DEFAULT_RADIO_CHANNEL
00053 
00054 # if defined(TRX_SUPPORTS_BAND_800)
00055 #  define DEFAULT_RADIO_CHANNEL    (0)
00056 # elif defined(TRX_SUPPORTS_BAND_900) && defined(REGION_USA)
00057 #  define DEFAULT_RADIO_CHANNEL    (5)
00058 # elif defined(TRX_SUPPORTS_BAND_2400)
00059 #  define DEFAULT_RADIO_CHANNEL    (17)
00060 # else
00061 #  error "No supported frequency band found"
00062 # endif
00063 #endif
00064 
00065 /* === types =============================================================== */
00066 
00068 typedef uint16_t crc_t;
00069 
00071 typedef struct
00072 {
00073     uint8_t start;
00074     uint8_t end;
00075     union
00076     {
00077         uint8_t buf[UART_FRAME_SIZE];
00078         p2p_wuart_data_t hdr;
00079     } data;
00080 } wuart_buffer_t;
00081 
00082 
00084 typedef enum
00085 {
00086     DO_CONFIGURE,
00087     WAIT_GUARDTIME,
00088     WAIT_PLUS,
00090     DATA_MODE,
00091 } wuart_state_t;
00092 
00093 /* === prototypes ========================================================== */
00094 #ifdef __cplusplus
00095 extern "C" {
00096 #endif
00097 
00098 static void wuart_init(void);
00099 static void configure_radio(void);
00100 
00101 static  uint16_t get_number(int8_t base);
00102 
00103 
00104 #ifdef __cplusplus
00105 } /* extern "C" */
00106 #endif
00107 
00108 #endif  /* #ifndef WUART_H */

This documentation for µracoli was generated on Tue Apr 9 2013 by  doxygen 1.7.1