This board wiring fits the Atmel radio development kit hardware and compatibles, e.g. the In-Cirquit ICradio Stick|Module 2.4G series.
The wiring of the radio and the ATmega is shown below:
AVR RF230 --- ----- PB4 --> SLPTR P?? <-- MCLK PD4 <-- IRQ (ICP1) PB5 --> RSTN PB0 --> SS PB2 --> MOSI PB3 <-- MISO PB1 --> SCK
KEY: PE5 LEDS PE2:PE4
Fuses/Locks: LF: 0xe2 - 8MHz internal RC Osc. HF: 0x11 - without boot loader HF: 0x10 - with boot loader EF: 0xff LOCK: 0xef - protection of boot section
Bootloader: Start at byte=0x1e000, address=0xf000, size = 4096 instructions/ 8192 bytes
STK500 + STK501 + Radio board
Defines | |
#define | MAX_FRAME_SIZE (127) |
#define MAX_FRAME_SIZE (127) |
maximum allowed frame size